配置手工负载分担模式链路聚合LACP示例

[S-switch-A]interface Eth-Trunk1

[S-switch-A-Eth-Trunk1]quit [S-switch-A]interface GigabitEthernet0/0/1 [S-switch-A-GigabitEthernet0/0/1] eth-trunk 1 [S-switch-A-GigabitEthernet0/0/1]interface GigabitEthernet0/0/2 [S-switch-A-GigabitEthernet0/0/2]eth-trunk 1 [S-switch-A-GigabitEthernet0/0/2]interface GigabitEthernet0/0/3 [S-switch-A-GigabitEthernet0/0/3]eth-trunk 1

[S-switch-B]interface Eth-Trunk1

[S-switch-B-Eth-Trunk1]quit [S-switch-B]interface GigabitEthernet0/0/1 [S-switch-B-GigabitEthernet0/0/1] eth-trunk 1 [S-switch-B-GigabitEthernet0/0/1]interface GigabitEthernet0/0/2 [S-switch-B-GigabitEthernet0/0/2]eth-trunk 1 [S-switch-B-GigabitEthernet0/0/2]interface GigabitEthernet0/0/3 [S-switch-B-GigabitEthernet0/0/3]eth-trunk 1

查看Eth-Trunk 1的运行壮态

[S-switch-B]dis trunkmembership eth-trunk 1 Trunk ID: 1 Used status: VALID TYPE: ethernet Working Mode : Normal Number Of Ports in Trunk = 3 Number Of Up Ports in Trunk = 3 Operate status: up   Interface GigabitEthernet0/0/1, valid, operate up, weight=1 Interface GigabitEthernet0/0/2, valid, operate up, weight=1 Interface GigabitEthernet0/0/3, valid, operate up, weight=1

后面就针对eth-trunk 1进行端口配置即可